Perkins Engines Peterborough: Air Conditioning Inspection Case Study

You are here: 

Syntegra Consulting has successfully undertaken the Air Conditioning Inspection of a number of industrial units part of Perkins Engines, in Peterborough.  Syntegra undertook the ACI inspection of the two industrial units which are air conditioned buildings.

The undertaking of an ACI (Air Conditioning Inspection) is a legal requirement according to article 9 of the Energy Performance Building Directive in England and Wales (EPBD). Air Conditioning Inspections are mandatory for all buildings with installed systems with rated cooling output greater than 12kW. The air conditioning inspection consisted of a site inspection and the production of the Air Conditioning Inspection report, which presents the site inspection’s findings and the recommendations for improving the system’s energy efficiency in order to save energy and reduce carbon emissions.

The two industrial units inspected lie under the packaged cooling systems assessment Level 3, since it is air conditioned by a number of single and multi split DX units.

Syntegra consulting has managed to identify areas of improving the energy efficiency further of the building’s air conditioning system. Recommendations were made in upgrading AC controls and control methodology. In addition, Syntegra investigated in improving the AC system’s efficiency and the building’s overall energy performance further, by recommending the use of LED lighting. LED lighting is the most energy efficient lighting technology compared to conventional technologies. Furthermore, LED lighting generates minimum heat, which helps reducing a building’s cooling load from lighting. Therefore, LEDs not only reduce the lighting electricity cost, but also the AC (air conditioning) cost of electricity due to reduced heat gains (cooling load). In addition, Syntegra managed to present solutions involving energy/heat recovery systems.

Moreover, Syntegra is following a holistic approach during the ACI site surveys. This means, that during the inspection other areas that will improve the building’s energy performance are examined. Such an area is the implementation of Low Zero Carbon technologies (LZC) aka Renewable Energy technologies. More specifically the possibility of implementing PV solar panels was examined. The utilization of PV (photovoltaic) panels can generate free energy from the sun and also provide an income to the building owner through the Feed-In-Tariff (FIT) scheme.

For more information on Air Conditioning Inspections, FREE LED Lighting Feasibility Studies, PV/FIT design & installation please contact Syntegra Consulting on T: 08450 091625 and Email: mail@syntegra-epc.co.uk

Latest Posts

What are the Frequently Asked Questions about Syntegra Group's Services?

1 What types of environmental assessments does Syntegra Group offer for development projects?

Syntegra Group provides a range of environmental assessments including Air Quality Assessments, Environmental Impact Assessments (EIA), Hydrology and Flood Risk Assessments, and Preliminary Ecological Appraisals. They also cover specific areas like noise impact, arboricultural services, and biodiversity net gain.

2 How can Syntegra Group assist with achieving sustainability certifications for new buildings?

Syntegra Group offers consultancy and assessment services for various sustainability certifications. These include BREEAM, LEED, Well Building, and Passivhaus design. They also provide CIBSE TM65 assessments and whole life cycle carbon assessments.

3 What building performance testing services are available to ensure compliance and efficiency?

Syntegra Group conducts essential building performance testing such as Acoustic Sound Insulation Testing, Air Tightness Testing, and Thermal Imaging Surveys. They also provide certifications like SAP & SBEM Part L Calculations and Energy Performance Certificates (EPCs).

4 Can Syntegra Group provide M&E engineering design for complex building projects?

Yes, Syntegra Group offers comprehensive M&E Engineering Design services. This includes Mechanical Design Consultancy, Electrical Design Consultancy, and Architectural Acoustics. They also provide M&E Clerk of Works and Security Design & Consultancy.